AirFlateBecome a tester

Pressure,sorted.

Air down for the trail. Air up for the road.

Pick a preset, press Start, and AirFlate does the rest — inflating or deflating automatically and stopping dead on target, every time. And with Always On it's more than a tire inflator: an air supply for bike tires, blower tools and more.

01Fitment

Fits the kityou already own.

1.1Compatibility

Works with ARB and any other air compressor.

AirFlate drives the compressor you already own. It doesn't replace it.

** Your compressor must have a built-in pressure cut-off switch.

Top view of a vehicle's storage well: the AirFlate controller and an air outlet with a rocker switch on a steel plate, a twin-cylinder compressor with blue heads beside them, and a coiled orange air hose.
A grey Cayenne SUV on knobby tires with its hood open and one orange air hose running from the engine bay to the front-left tire.
1.2Connect it your way

Connect it your way.

From the manifold, connect one or more outputs. Fill a single tire, or all four at once — automatically.

02Intelligent

It learnsyour compressor.

It measures what your compressor can actually do — in every environment — and plans the run around it.

  • Adapts the inflate strategy to your compressor's real output
  • Fewer compressor cycles
  • Less strain on the electrical system
  • Less strain on the pneumatic system
0.0psi
Target 38
03Accuracy

On target.Every time.

Inflating or deflating, the controller keeps checking the system and its own performance until the target is reached. No deviation.

04Set it and forget it

Set it.Forget it.

  • Inflates and deflates on its own — one algorithm, both directions
  • No gauge to watch, no valve stem to hunch over
  • Stops itself at the target and corrects any overshoot
  • Fills one tire or all four, hands-free
  • Learns your compressor, so every run is shorter and gentler
  • Works with no phone — the app is optional
  • Every fault latches loudly and closes the valves
05Terrain presets
38PSI

A presetfor every surface.

Presets

The everyday setting. Firm, predictable, and one press away from wherever you started. Rename or re-target any preset in the app.

A mud-splashed green pickup with a roof rack driving a mountain road, with the dirt trail it came from winding away behind it.
06Always On

Always On.Your air supply.

No target. It runs until you press Stop or the timer runs out.

Always ON∞
  • 01

    Small things

    Bike tires, soccer balls — anything you'd otherwise pump by hand.

  • 02

    Blow it clear

    Connect a blower tool and clear sand and dust off the vehicle and the kit. **

  • 03

    Pneumatic tools

    Run air tools from the same compressor. **

Time left

7:00

** Depends on your setup and compressor performance.

Safety limit. Always On stops by itself after 7 minutes at a time — a built-in safety limit.

Split image: on the left a man checks the pressure of a fat bike tire beside a 4x4; on the right a man fixes a timber fence rail with a nail gun, its air hose running back to a pickup.

** Depends on your setup and compressor performance.

07The app

A better screen.

AirFlate runs fully on its own — pick a preset and press Start on the controller. The app adds remote control, a far better view of the run, and is where you edit your presets.

  • Live pressure readings
  • Edit targets and rename your presets
  • Remote controls
  • History of your last 10 runs
  • Lock-screen alerts when a run finishes or a fault latches
  • Works with no signal — Bluetooth only
AirFlate app main screen: 28 PSI above the tape gauge, status Ready, and the presets Always ON, Road, Sand and Rock above an orange Start button.
AirFlate app Edit preset dialog: the alias Road, a target pressure of 45 PSI with minus and plus buttons, and Cancel and Confirm buttons.
AirFlate app Settings screen: the connected controller with an Update Firmware button, Auto-Connect, the pressure unit choice of PSI, BAR or kPa, an engine-running safety switch and a link to Inflate Logs.
AirFlate app Inflate Logs screen: a list of stored runs, each with its preset, date, outcome and final pressure.
iPhone notification from AirFlate, marked Time Sensitive: Inflation Complete. Inflation stopped at 45 PSI.
08Select, start, walk away

Select a preset.Hit start.Walk away.

  1. 01

    Select a preset

    Road, Sand, Rock — or Always On.

  2. 02

    Hit Start

    On the device or from your phone. Both do exactly the same thing.

  3. 03

    Walk away

    It inflates or deflates to the target, corrects any overshoot, and stops.

The phone and app are purely optional — not a requirement. The controller works fully without them.

Linked
30.0PSI

Presets

The phone and app are purely optional — not a requirement. The controller works fully without them.

09Built to be trusted

Every faultlatches loudly.

Reliability first: minimal features, minimal failure points. Valves are normally-closed, so a power loss shuts everything off — and they can never open together.

OVERPRESSURE

Pressure beyond the safe ceiling. Valves close, device latches.

STALL

The pump or vent isn't moving the needle. It stops instead of guessing.

TIMEOUT

A run that takes too long ends itself.

NO SENSOR

No pressure reading, no action.

12V UNDER / OVER

Supply out of range. Clears on its own when the supply recovers.

10Built to last

Built tolast.

Reliability is the feature. Every part is chosen and built to keep working, trip after trip.

  • 01

    High-quality components

    No bargain-bin parts in the signal or the power path.

  • 02

    Solenoid manifold

    One compact block carries the inflate and deflate valves and the outputs to your tires. Both valves are normally closed, so they shut if power is lost.

    Close-up of the solenoid manifold: two steel valves on a black machined block, with a pressure sensor at one end and an air port and brass plug on the front.
  • 03

    Wiring harness

    Automotive grade and made for this kit. One connector links the controller to its valves, pressure sensor and power.

    Close-up of the wiring harness: a white 8-pin connector and a black sealed connector in front of a coiled, braided loom with two ring terminals.
  • 04

    Conformal-coated electronics

    A protective coating over the board helps guard the electronics against dust and moisture, improving the durability and life of the hardware.

    Macro of a coated circuit board under blue UV light, with the clear coating shining over its components.
Close-up of the solenoid manifold: two steel valves on a black machined block, with a pressure sensor at one end and an air port and brass plug on the front.
Close-up of the wiring harness: a white 8-pin connector and a black sealed connector in front of a coiled, braided loom with two ring terminals.
Macro of a coated circuit board under blue UV light, with the clear coating shining over its components.
11What's in the box

What'sin the box.

  • AirFlate controller
  • Solenoid manifold
  • Wiring harness
  • Mounting hardware
  • 2 AirFlate stickers

** Final contents TBC. Your installer partner confirms exactly what ships.

Flat-lay on dark slate: the AirFlate controller, the solenoid manifold, a coiled wiring harness, mounting bolts, cable ties and two AirFlate stickers.
12Field testers

Become afield tester.

AirFlate is still a prototype, and the best way to improve it is out in the real world. We're looking for people to try a demo unit and tell us honestly how it went.

01

Apply

Tell us who you are and why you'd be a good fit.

02

Try a demo unit

If you're selected, we'll arrange a unit for you to fit and use.

03

Tell us how it went

The good and the bad. Your feedback helps shape what we build.

Become a tester
13Questions

Goodquestions.

Do I need my phone to use it?+

No. AirFlate is fully standalone — pick a preset and press Start on the device itself. The app is a second set of buttons and a much better screen.

How does it know when to stop?+

It measures how fast your pump fills and your vent empties, works toward the target in shrinking bursts, and corrects any overshoot by venting back down.

Can it let air out as well as put it in?+

Yes. One algorithm handles both directions, and a run works from above or below the target.

What happens if something goes wrong?+

Overpressure, a stalled pump or vent, a timeout, a missing sensor or a bad 12 V supply each latch a clear fault. The valves close and it stays stopped rather than guessing.

Can I change the presets?+

Yes — rename them and set their target pressure from the app. The selection survives a power cycle.

Where can I buy it?+

AirFlate is still in testing, so it isn't on sale yet. It will come through trusted distributors and installers. In the meantime, you can apply to be a field tester.

Which compressors does it work with?+

ARB and any other air compressor — as long as the compressor has a built-in pressure cut-off switch. Vehicle compatibility lists are TBC.

Can it fill all four tires at once?+

Yes. From the manifold you can connect one or more outputs, so it can fill a single tire or all four automatically.

How much does it cost?+

Pricing is set by our partners. TBC.

Pressure,
sorted.